2011 年 9 月 8 日 | 文件格式: PDF, 165 KB

Contact our technical support center or your Christie Sales Manager if you require more information or assistance.

2010 年 12 月 7 日 | 文件格式: PDF, 649 KB

This PDF document contains detailed instructions on how to replace the lamp and/or filters in the Christie projectors and/or display equipment listed below. A lamp should be replaced when it reaches its end of life or sooner if a noticeable degradation in brightness occurs. The filters of your Christie projector should be replaced whenever the lamp is replaced. If you are working in an extremely dusty environment you may want to replace the filters sooner. Use only the Christie approved Lamp and Filter Replacement Kit specified for your projector model. Contact our technical support center or your Christie Sales Manager if you require more information or assistance. ;

2014 年 8 月 15 日 | 文件格式: PDF, 108 KB

Provides information about the removal and installation of the projection lens for the DHD700, DHD800, and DS+750 projectors. Contact Christie technical support or your Christie Sales Manager if you require more information.​

2013 年 5 月 1 日 | 文件格式: PDF, 102 KB

Provides information and procedures for correcting a filter issue on projectors equipped with a filter scroller. Contact Christie technical support or your Christie Sales Manager if you require more information.

2011 年 5 月 24 日 | 文件格式: PDF, 204 KB

This PDF document describes the serial communications (frequently referred to as RS232 codes) of the Christie projectors listed below. These communications allow the control of the projector by an external controller, such as an AMX or Creston controller. Once connected to the RS-232 port of the projector, controllers can access projector controls and setups, issue commands and receive replies. Contact our technical support center or your Christie Sales Manager if you require more information or assistance.

2010 年 4 月 21 日 | 文件格式: PDF, 674 KB

This PDF document describes the serial communications (RS232 codes) of the Christie projectors and/or display equipment listed below. These communication protocols allow for the control of the Christie projector by an external controller, such as an AMX or Creston controller. Once connected to the RS-232 port of the projector, controllers can access projector controls and setups, issue commands and receive replies. Contact our technical support center or your Christie Sales Manager if you require more information or assistance.

2010 年 4 月 21 日 | 文件格式: PDF, 116 KB

This PDF document contains a static table outlining each lens’s throw formulas, vertical and horizontal offset capabilities and attainable minimum and maximum screen sizes when used with the Christie LW600 LCD projector. All measurements are presented in metric and imperial formats. Contact our technical support center if you require more information or assistance

2011 年 5 月 24 日 | 文件格式: PDF, 649 KB

This is a PDF file version of this product's CAD drawings (Computer Aided Design). These files provide all the critical dimensions for the physical installation of this Christie cube. All measurements are presented in metric and imperial formats. Contact our technical service center or your Christie sales manager if you require assistance or more information regarding this download.

2010 年 4 月 22 日 | 文件格式: PDF, 10.7 MB

This document is an electronic version of the User Manual that is shipped with the Christie projectors and/or display equipment listed below. This detailed and heavily illustrated manual contains information regarding product set-up, operation, maintenance and trouble-shooting, including instruction on how to properly connect this display system to all data and video sources, how to use the internal menu systems, and how to change lamps, lenses and/or filters. Contact our technical support center or your Christie Sales Manager if you require more information or assistance.